Park Tool TW-6.2 3/8″ Ratcheting Torque Wrench (10-60nm)

Torque It To Spec!

With today’s lightweight components, torque wrench use in the shop is no longer an option — it’s a must for every mechanic. The Park Tool TW-6.2 is a high quality, ratcheting, click-type torque wrench that accurately measures and applies the proper amount of torque to a component’s threaded fastener(s). The TW-6.2 is designed for higher torque settings for repairs and installation in the bottom bracket, cassette lockring and other areas that use a higher torque setting range.

Features:

• 10–60 Newton meter range (88–530 Inch Pounds)
• Adjustable in 0.25 Nm increments
• Ratcheting 3/8″ drive
• Reads and registers for both left hand and right hand threading
• Dial-adjust system allows desired torque setting to be preset
• Calibrated to be accurate to +/- 4%
• Length: 36.2cm (14.25″)
• Comes with protective case

---

*NOTE: Torque wrenches are measuring instruments and are not intended for use as a general-purpose ratcheting driver.

The product weight specified is an approximate weight based on the manufacturer’s specifications (if available) or our measurement of one or two examples. For most products, the weight will typically vary by 5% to 10%.